Home> Products> manufacturing unit

{ "products": [ { "_id": "5b7b9101b8ab48054b961815", "fptag": "GIREESHHEATEXCHANGERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": " Air Blast Coolers", "description": "AIR BLAST COOLERS OVERVIEW : –\nGireesh Air/Oil heat exchangers have been made to be used in the return line of the hydraulic systems. The cooler element is made from alum-alloy, which is a highly conductive material. The braise welding process of the, gives a high thermic exchange and a good pressure rating.\nMineral oils, hl, hlp, water-oil emulsion.We recommend that a bypass valve is installed in parallel to the heat exchanger, to protect it during the starting. Make sure there is no obstruction to the air flow.\nFEATURES OF AIR BLAST COOLERS : –\nThese are continuous flat fin and tube heat exchangers having compact and sleek design. \nIdeal for oil cooling applications where there is a scarcity of water and fir economy of operation. \nProvided with axial flow fan and motor of requisite capacity together supplied as a completely packaged unit. \nStandard sizes available from capacities ranging from 500 kcal / hr to 10,000 kcal / hr. \nHigher sizes and custom built units can be offered as per customer”s requirements. \nDesigns with copper tubes / Aluminium fins and Copper tubes / Copper fins available. \nAvailable for working pressures up to 15 bar and working temperatures up to 150° C. \nAIR BLAST COOLERS MAINTENANCE : –\nOil side cleaning: The oil side of the cooler can be cleaned by flushing with a detergent or a degreasing products compatible with aluminium. To remove the residuals silt, please use compressed air.\nAir side cleaning: The air side of the cooer can be cleaned using compressed air or water. Please pay attention to the jet direction for not spoiling the vanes. If the cooler is contaminated with oil or grease, you can steam clean the cooler. Make sure the electric motor is disconnected and properly protected.\n \nAIR BLAST COOLERS CAPACITIES : –\nThe cooling capacity of the heat exchangers is based on the outlet water temperature being above the ambient temperature. The rated cooling capacity will apply when there is a temperature differential between the inlet and the outlet of e.g., in those conditions water would return to the cooling unit at above ambient. The heat extraction rate will vary according to the differential between the inlet and ambient temperatures. The greater this differential, the great the heat extraction rate at the cooler.\n\n", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "conditions water", "tube heat exchangers", "heat extraction rate", "ambient temperatures", "Please pay attention", "high thermic exchange", "please use compressed", "outlet water temperature", "BLAST COOLERS CAPACITIES", "oil cooling applications", "temperature differential", "BLAST COOLERS MAINTENANCE", "AIR BLAST COOLERS OVERVIEW", "degreasing products compatible" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 1, "imageuri": "https://productimages.withfloats.com/actual/5b7b91013bed8c0540a48157.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5b7b91013bed8c0540a48157.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-08-21T04:11:45.304Z", "updatedon": "2018-08-21T04:11:45.304Z", "buyonlinelink": null, "producturl": "http://WWW.GIREESHCOOLINGTOWERS.COM/products/-air-blast-coolers/1", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": null, "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b7b908ca1321d0681d7282d", "fptag": "GIREESHHEATEXCHANGERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": " Brazed Plate Heat Exchangers", "description": "Designed for maximum performance, the Gireesh heat exchanger”s compact, rugged assembly is composed of stainless steel plate packs sealed together by means of brazing metal along the border of the units. This eliminates the need for traditional gaskets or external pressure retaining parts.\nThe plate packs are embossed with special corrugation patterns to promote high turbulence flow, which dramatically increases the heat transfer rates of the units thus making them a highly economical and effective solution for many processes and heating applications.\nAPPLICATIONS:\nCentral Heating \nOil Coolers \nHedonic Heating \nSolar and Geothermic Heating \nIndustrial Process Heat Recovery \nCondensers and Evaporators in Refrigeration systems \nClose approach fluid-to-fluid heat transfer \nExcellent for use in wood boiler industry \nFeatures Of Brazed Plate Heat Exchangers : –\nThe heating surface consists of thin corrugated metal plates stacked on top of each other Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, always in counter-current flow.\nThe media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the media handled.\nHigh heating transferring coefficient \nHigh heat recovery rate \nGreat flexibility \nLow flow stagnation \nLight in weight \nCompact structure and easy installation \nLess space occupation \nSmall consumption of water \nDurability \nLow scaling coefficient \nHigh quality \nMaintenance And Brazed Plate Heat Exchangers : – \nMade from stainless steel 304 or stainless steel 316 \nCost effective and lower operation cost \nCompact structure, easy installation \nThin plate \nHigh heat exchange coefficient \nLess idle liquid \nLess weight \nOnly20—30% weight of shell-tube heat exchangers \nLess water consumption \nHigh thermal efficiency allows BPHE only takes 1/3 of cold water consumption of shell-tube exchangers) \nDurable \nUp to 400 ° C Temperature and 30 bar pressure \nNo corrosion \nEliminating gasket \nMinimal Fouling \nThe greatest turbulence in the flow results in less fouling and fewer cleaning \n", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "heat recovery rate", "Geothermic Heating", "heat transfer rates", "stainless steel 316", "stainless steel 304", "high turbulence flow", "wood boiler industry", "Process Heat Recovery", "Refrigeration systems", "cold water consumption", "heat exchange coefficient", "stainless steel plate packs", "Brazed Plate Heat Exchangers", "special corrugation patterns" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 1, "imageuri": "https://productimages.withfloats.com/actual/5b7b908c866b3d053c2007f5.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5b7b908c866b3d053c2007f5.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-08-21T04:09:48.238Z", "updatedon": "2018-08-21T04:09:48.238Z", "buyonlinelink": null, "producturl": "http://WWW.GIREESHCOOLINGTOWERS.COM/products/-brazed-plate-heat-exchangers/1", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": null, "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b7b8fd2b6e61c051dd0ca48", "fptag": "GIREESHHEATEXCHANGERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": " Finned Tube Heat Exchangers Manufacturers", "description": "Finned Tube Heat Exchangers for applications that require high heat transfer area for relatively low heat transfer fluids. The advantages of using these finned tube heat exchangers are that they are compact. Our integrally finned tube heat exchangers can be used in refrigeration condensers as well as for oil cooling applications. The typical applications are for air heating, cooling. The fins are either plate fins or helically wound depending upon the quality of air and the temperature. The capacities range from 1000 kcal/hr to 1,000,000 kcal/hr.\nWe cater finned tube heat exchangers which are designed as per the international standards and requirements of the clients. These exchangers can be employed for cooling or heating of air or other gases which flow in a duct or cooling of water and other liquids using air. Also, these units are provided with persistent flat-fin and tubes, tubes with annular drawn fins, tubes with continuous spirally wound plain or corrugated fins or tubes with washer type fins.\n", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "plate fins", "capacities", "continuous", "temperature", "requirements", "corrugated fins", "annular drawn fins", "typical applications", "high heat transfer area", "international standards", "low heat transfer fluids", "oil cooling applications", "refrigeration condensers", "Tube Heat Exchangers Manufacturers" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 1, "imageuri": "https://productimages.withfloats.com/actual/5b7b8fd23d9fc7058903eae4.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5b7b8fd23d9fc7058903eae4.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-08-21T04:06:42.569Z", "updatedon": "2018-08-21T04:06:42.569Z", "buyonlinelink": null, "producturl": "http://WWW.GIREESHCOOLINGTOWERS.COM/products/-finned-tube-heat-exchangers-manufacturers/1", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": null, "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b7b8e7c7f86ea053fd822f0", "fptag": "GIREESHHEATEXCHANGERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Cross flow cooling towers", "description": "CROSS FLOW COOLING TOWERS OVERVIEW:\nGireesh Cross Flow Cooling Towers are designed & manufactured to deliver utmost space and energy efficiency. There is no need of maintenance for the rotary sprinklers or tiny nozzles. One can easily clean the distribution basin and nozzles even when the tower is operating thus, saving pump power. The fan, motor and water distribution system is easily maintained.\nTECHNICAL SPECIFICATION OF CROSS FLOW COOLING TOWERS:\nThe tower draws the air through the side and the upwards moving hot water gets collected in the FRP basin fitted on the top and the air passes through the target nozzles and sprinkles over the PVC fills. \nADVANTAGES OF CROSS FLOW COOLING TOWERS:\nAluminium die casting m/c \nAir compressors \nA/C plant & chilling plants \nPlastic Injection moulding m/c and Blow moulding m/c \nChemical industries \nDairy, and food processing industries \nDistilleries and Breweries plants \nGenets & Megawatt Projects \nGlass Mfg. Plant \nHerbal, Aromatics & extraction plants \nIndustries heat process \nOil refineries \nPVC pipes mfg.plant \nSoap / Cosmetic mfg. industries \nSteel factory and foundry. \nFEATURES OF CROSS FLOW COOLING TOWERS:\nTo net propelling demands of our clients, we are engaged in offering a wide range of Cross Flow Cooling Tower. This cooling tower is designed for maximum service life and durable structure for long working period. It’s PVC perforated “v” bar provides maximum wet surface and long air water contact to give maximum performance in all seasons. This product is widely demanded in domestic as well as international market.\nLong life \nLess maintenance \nWithstand all adverse conditions \nMAINTENANCE AND SPARES FOR CROSS FLOW COOLING TOWERS:\n1. Excellent Design and Long lifetime: The shell of cooling tower adopts high quality and toughness glass fibre, beautiful shape, resistant to natural factors and chemical material erosion, looks brand new even after long time use. All the steel shelves are processed by immersive hot galvanized zinc and reducing the oxidation mostly, prolong the service life. \n2. High Efficiency and Energy Saving: Gireesh series cooling tower using excellent quality PVC film as thermal interface material, corrosion resistant, no deformation, curved and diagonal design film effectively prolongs exchange time between high temperature water and air inside cooling tower, which makes air flow smoothly and resistance lower, meanwhile, making the water drift ratio lowest, furthermore, the axial and arc fan, specially designed basin with evenly distributed water stoma, which highly improved heat exchange rate of cooling tower and lower the entire cooling tower”s energy consumption and noise. \n3. Easy Installation, Reasonable and Practical Usage: Gireesh series cooling towers can be paralleled for multi-units, flexible combination, widely used. The body structure is tidy, standardized, and compact and strong, which is easy for installation. The design and manufacture are all on basis of practical uses, so it can meet customers” requirement better with high quality. ", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "water drift ratio", "distribution basin", "maximum service life", "diagonal design film", "toughness glass fibre", "long air water contact", "high temperature water", "water distribution system", "excellent quality PVC film", "food processing industries", "thermal interface material", "Gireesh series cooling towers", "cooling tower adopts high quality", "CROSS FLOW COOLING TOWERS OVERVIEW" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 1, "imageuri": "https://productimages.withfloats.com/actual/5b7b8e7c0bd332050e49979b.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5b7b8e7c0bd332050e49979b.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-08-21T04:01:00.218Z", "updatedon": "2018-08-21T04:01:00.218Z", "buyonlinelink": null, "producturl": "http://WWW.GIREESHCOOLINGTOWERS.COM/products/cross-flow-cooling-towers/1", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": null, "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b7b8d981f92f1054a868a56", "fptag": "GIREESHHEATEXCHANGERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": " Forced Draft Cooling Towers ", "description": "Gireesh are an accredited manufacturer and supplier of high quality Forced Draught Cooling Towers that are widely used in various industries. These cooling towers are manufactured using quality-approved factor inputs, which we source from the authentic vendors of the industry. Our offered range is available in various specifications in order to meet the varied needs of the clients.\nFeatures:\nRigid construction \nCorrosion resistance \nLonger service life \nFROCED DRAFT COOLING TOWERS FEATURES:\nForced draught fan handles cold and dry air with less specific volume, and hence, air flow quantity is lesser for a given duty than induced draught.\nAlso, we use world renowned high efficiency fills, which has lesser static resistance than any other type of fill. \nFinally, the velocity pressure which gets wasted into the atmosphere in induced draught is utilized effectively in the forced draught system that we offer, contributing to savings in power. \nThe exit air velocity is less in a forced draught cooling tower, therefore, the carry over loss gets minimized. \nCoupled with this, very high efficiency drift eliminators reduce the total drift loss to max. 0.05% compared with 0.2-0.3% for other systems. \nThis also eliminates the drift nuisance as well as algae formation. \nAs the air entry is from one side and discharge from the top, the clearance required for forced draught cooling tower is only from one side. \nOver and above the preceding points, the forced draught cooling tower provided by us has moving parts near the foundation, thus increasing stability and life. \nThe fan handles dry air, and therefore, the problem of corrosion reduces considerably and moisture condensation, motor burnouts also eliminate. \nMaintenance of forced draught cooling tower is easier as the fan is near the ground and is easily accessible. \nThe top is open, and hence internals are also easily accessible. \nSuper Cool Cooling Towers provides aesthetically pleasing units that incorporate features specifically laid down in government guidelines and health & safety regulations and recommendations, in effect, encompassing features which are better than the minimum, for industry, specifying authorities, government agencies and consulting engineers. \nOur products are world class in quality and to that effect we are supported with the thermal efficiency of German Fills, the best heat transfer media in the world. \nThe Super Cool range of cooling tower components is delivered to the site for offloading, integrating, positioning and complete installation on the clients’ foundations. \nSuper Cool Cooling Towers are supplied with easily removable pack, access doors to comply with health & safety regulations and recommendations regarding removal and demountable heat transfer pack modules for effective cleaning. \nFORCED DRAFT COOLING TOWERS MAINTENANCE:\nEconomy in power consumption \nEconomy in water consumption \nEconomy in space consumption \nHigh performance and quality \nDesigned to meet high wind velocity and earth quake zones \nCorrosion proof fibre glass construction – considerable reduction in corrosion \nElimination of motor burnouts \n \n ", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "induced draught", "exit air velocity", "draught fan handles", "Cool Cooling Towers", "fan handles dry air", "forced draught system", "high efficiency fills", "various specifications", "considerable reduction", "Forced Draft Cooling Towers", "proof fibre glass construction", "DRAFT COOLING TOWERS MAINTENANCE", "high efficiency drift eliminators", "demountable heat transfer pack modules", "high quality Forced Draught Cooling Towers" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 1, "imageuri": "https://productimages.withfloats.com/actual/5b7b8d99e0f38c0539098d13.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5b7b8d99e0f38c0539098d13.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-08-21T03:57:12.362Z", "updatedon": "2018-08-21T03:57:12.362Z", "buyonlinelink": null, "producturl": "http://WWW.GIREESHCOOLINGTOWERS.COM/products/-forced-draft-cooling-towers-/1", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": null, "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b7b8d3f67d7f90657267633", "fptag": "GIREESHHEATEXCHANGERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": " Wooden Cooling Towers", "description": "Gireesh wooden cooling tower are widely used by our satisfied customers the construction of these wooden cooling towers includes treated timber that has the ability to resist the adverse effects of contaminated water from the process industries. We have designed for dependability, operational simplicity and durability, these Gireesh Wooden Cooling Towers cater to the ever increasing demands for power generation in various process industries. Highest efficiency & lowest operational cost are the prime highlights of these wood cooling towers. These are designed to provide more wet surface area for uniform water distribution and improved heat transfer rate. Gireesh Cooling Towers is one of the leading companies engaged in production and supply of wooden cooling towers\nQuality Material. \nLong Lasting \nWe Gireesh Cooling Towers are one of Indian leading manufacturing and best Services of wooden cooling towers. Since, dealing among a projects in India and overseas of cooling technologies.\nSILENT FEATURES OF WOODEN COOLING TOWERS:\nTIMBER All timber is Pine wood and is treated with Chromate Copper Arsenates. All plywood components are treated marine grade water proof plywood. All sections are fully machined prior to treatment. \nSTRUCTURAL FRAMING Structure is bolted and is designed to withstand all operational loads and wind pressure. \nHARDWARE Hardware such as nuts, bolts, washers, ring connectors etc. shall be hot dip galvanized steel. \nINTERNAL FILL & FILL SUPPORT Rectangular Fill splash bars are designed to offer maximum splash and wetted surface in such a manner that it permits no dislocation of splash bars and yet allows them to expand or contract with changes in moisture content of wood without cracking, warping or sagging. Splash bars are supported in GRP grid supporters, which are firmly attached to structural girt members. \nDRIFT ELIMINATORS these are made of treated timber planks supported on grooved treated plywood Eliminator frame in herringbone pattern or PVC in Construction. \nCASING & AIR INLET LOUVERS: These will be made of corrugated AC Sheet or FRP Sheet. Tower corners are covered by FRP boards. Casing is water tight sealed. Air inlet Louvers are of corrugated AC Sheets or FRP Louvers. \nDISTRIBUTION SYSTEM Cross flow towers employs a swamped pan distribution. The open pan covering the entire fill area distributes hot water evenly over the fills by means of PVC nozzles. \nFAN DECK The fan deck is of FRP OR MS/HDG Construction with Motor frame & Fan Guard. \nFANS dynamically balanced Cast Aluminium Alloy / FRP Fan \nMOTOR TEFC-IP 55 With EN -8/9 Shaft & Class F insulation. \nDIRECT DRIVE CCS TIMBER COOLING TOWER o Advantages of wooden cooling tower: o To increase high cooling efficiency o compatible spares o low noise o Easy maintenance \nMATERIAL USED IN WOODEN COOLING TOWERS:\nStructure : Treated Timber \nFill : Treated Timber /PVC \nFill Support : GRP Grids / SS Grids \nDrift Eliminator : Treated Timber 2 Pass /PVC \nDrift Eliminator : Support Marine Plywood /PP \nStructural Connector : FRP Rings \nNozzle : Polypropylene (PP) \nHardware’s : HDG.MS/SS \nNails : Screw Shank SS \nFan Assembly : Cast Aluminium Alloy /GRP Bladed \nFan Cylinder : FRP \nGearbox : Worm/Spiral Bevel \nDrive Shaft : Floating HDG.MS \nCasing & Louvers : Corrugated AC Sheet/Corrugated FRP Sheet \nElectric Motor : To Suit Country Specific \n ", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "wood cooling towers", "Gireesh Cooling Towers", "SYSTEM Cross flow towers", "swamped pan distribution", "Chromate Copper Arsenates", "uniform water distribution", "various process industries", "Gireesh Wooden Cooling Towers", "treated plywood Eliminator frame", "entire fill area distributes hot water", "treated marine grade water proof plywood", "FILL SUPPORT Rectangular Fill splash bars", "DRIVE CCS TIMBER COOLING TOWER o Advantages", "increase high cooling efficiency o compatible spares o low noise o Easy maintenance" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 1, "imageuri": "https://productimages.withfloats.com/actual/5b7b8d409937e906727d44d2.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5b7b8d409937e906727d44d2.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-08-21T03:55:43.815Z", "updatedon": "2018-08-21T03:55:43.815Z", "buyonlinelink": null, "producturl": "http://WWW.GIREESHCOOLINGTOWERS.COM//-wooden-cooling-towers/1", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": null, "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b7b8cbd0275450663b55fa2", "fptag": "GIREESHHEATEXCHANGERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Dry Cooling Towers", "description": "Gireesh cooling towers we are considered as one of the distinguished manufacturers and exporters of the Dry Cooling Towers. Offered towers are wisely engineered and integrated with highly functional components. These are used for high temperature applications mainly for generators and process cooling. Finds its applicability across the chemical, process and pharmaceutical industries, our range of Dry Cooling Towers is known for its robust construction and long lasting performance.\nFurther, we offer our comprehensive stock to customer’s at most competitive prices. Dry Cooling towers are produced in forced draught and induced draught designs, and in single and multi-fan arrangements, depending customer specifications and requirements.\nFEATURES OF DRY COOLING TOWERS:\nThe fluid coils of international standards are designed and selected through providing accurate data on thermal transfer rate based on which they are manufactured. The tower designed incorporates the shell and tube designed with copper tubing and aluminium foil fins. The water losses are 0.01% since, the circuits are of the closed loop type and the towers are most space saving / energy efficient once. They are best suited for applications such as Furnace coil water cooling, D/G Sets, Compressors.\nThe fans are of aluminium die cast with adjustable pitch and are individually tested for different flow rates. They are all dynamically balanced. Since, the complete fan is of Aluminium Alloy / Plastic it does not corrode when used in outdoor applications.\nDry cooling towers are in a single unit can be provided in capacities from 100 kw to 2500 kw and they can be multiplexed to reach many thousand or kilowatts. The offered towers are tested by our quality experts.\nCapacities 10TR to 1000TR, in a single cell Water flow 10CMH to 1000 CMH, in a single cell \nDelta T temperature drop 4 Deg C to 30 Deg C, in a single cell \nEliminates raw water Tank and Pumps \nEliminates Moving parts except fan & motor \nEliminates Mixing of dust / dirt / fly ash with Water \nEliminates PHE at Furnace & Coil circuit \nMAINTENANCE OF DRY COOLING TOWER:\nCooling Tower is not required\nHeat Exchanger is not required \nWater Treatment Plants is not required \nNo Water loss \nNo scale of forming problem \nPower saving \nMaintenance cost is very very low \nLow cost and Higher Efficiency ", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "Dry Cooling Towers", "competitive prices", "comprehensive stock", "robust construction", "aluminium foil fins", "different flow rates", "thermal transfer rate", "functional components", "customer specifications", "international standards", "pharmaceutical industries", "T temperature drop 4 Deg C", "Furnace coil water cooling", "single cell Water flow 10CMH", "high temperature applications" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 1, "imageuri": "https://productimages.withfloats.com/actual/5b7b8ce90bd332050e499782.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5b7b8ce90bd332050e499782.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-08-21T03:53:33.063Z", "updatedon": "2018-08-21T03:54:17.3Z", "buyonlinelink": null, "producturl": "http://WWW.GIREESHCOOLINGTOWERS.COM/products/dry-cooling-towers/1", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": null, "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5d08c48126f6bb0001bf2599", "fptag": "GIREESHHEATEXCHANGERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Square Cooling Tower", "description": "Gireesh Cooling Towers in Three Phase Fiberglass Reinforced Polyester Square Cooling Tower, Capacity: 5000-10000l, 220-380 V.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "V", "Capacity", "Gireesh Cooling Towers", "Three Phase Fiberglass Reinforced Polyester Square Cooling Tower" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 31, "imageuri": "https://productimages.withfloats.com/actual/5d08c4815605110001376530.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5d08c4815605110001376530.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2019-06-18T11:01:21.632Z", "updatedon": "2019-08-14T07:07:49.401Z", "buyonlinelink": null, "producturl": "http://WWW.GIREESHCOOLINGTOWERS.COM/products/square-cooling-tower/31", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Gireesh Heat Exchangers & Cooling Towers", "category": "", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5d08c1b77f7a9b000199fd00", "fptag": "GIREESHHEATEXCHANGERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Square Cooling Towers", "description": "Square Type cooling Towers in Hitech Equipments.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Square Type", "Hitech Equipments", "Square Cooling Towers" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 30, "imageuri": "https://productimages.withfloats.com/actual/5d08c1b75605110001376383.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5d08c1b75605110001376383.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2019-06-18T10:49:27.521Z", "updatedon": "2019-08-14T07:09:14.607Z", "buyonlinelink": null, "producturl": "http://WWW.GIREESHCOOLINGTOWERS.COM/products/square-cooling-towers/30", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Gireesh Heat Exchangers & Cooling Towers", "category": "Square Shape FRP Type Cooling Towers", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }